Material: molding lamp + resin rhinestone
Size: 150*88*38mm / 5.9*3.5*1.5in
Diamond type: special shaped drill
Light source: LED beads
Power supply: 3 X AA batteries (not included)
DIY diamond painting steps:
1. Open the box and check the diamond painting tool.
2. Check the color of the resin diamond, order according to the code.
3. Unwrap the magnetic tape above and you will see many symbols corresponding to the code of the color.
4. According to the corresponding color coding clip, can fix corresponding resin inlaid diamond.
5. Suggest to complete one kind of resin diamond set, which is faster.
6. To create the perfect diamond painting, place the drawing in one place, so that each line of symbols does not have to leave the diamond behind.
7. To cut out a good figure from the drawing, install the sorting array on the flat surface of the material above.
8. The patchwork shall be flat, neat and without cracks.
9. After a good fight, the rest of the glue gap conforms to the diamond symbol.
This is a DIY diamond painting. It\'s not finished. You have to do it yourself.
All products are measured manually. Please allow 1-2cm deviation.
Due to the different monitor and light effect, the actual color of the item might be slightly different from the color showed on the pictures. Thank you!